+49 6221 3047-0

Contact Persons

AL and ALP | Stieber Clutch

Types AL, ALP are roller type freewheels. These units are part of the Stieber modular system. They are bearing supported, using two 160.. series bearings, and require oil lubrication. These units may be used in designs providing oil lubrication and sealing as on the example overleaf.

The bearings must not be axially stressed. Typically, types AL, ALP are used with standard covers that are designed to transmit torque, and provide oil lubrication and sealing. Usually these covers are used in pairs according to combinations shown on the following pages. The outer race of the AL model is plain to receive and center any component bored to H7* tolerance. Torque is transmitted by bolts through the cover plate in this case. Types AL, ALP are identical except that type ALP has a keyway on the outside diameter to transmit the torque. Two paper seals are delivered with each unit to be placed between the outer race and cover plates.

*These data refer to the indications in the product data sheet attached below (on page 2).


  • p-7426-sc-a4_alp
Auf das untenstehende Bild klicken, um PDF herunterzuladen. Literatur-Druckversion bestellen Hier klicken.


  • (A4) Overrunning Clutches & Backstops


  • p-8382-sc-a4

Literatur zum Thema

  • Stieber Clutch Line Card
  • Overrunning Clutches & Backstops
Stieber AL and ALP Self Contained Freewheels

Download 3D Model

We are now a part of Regal Rexnord.
Learn More